Diyvehiclerepair
General specifications. The Dana 35 (as well as the AMC-15) is found in a wide variety of vehicles. The most common Dana 35 applications are as a rear axle in the Jeep Cherokee, Jeep Wrangler, and Jeep Comanche and as a front axle in the Ford Explorer and Ford Ranger.
- Can you make a Dana 35 strong?
- How do you tell if I have a Dana 35?
- What is the difference between a Dana 30 and Dana 35?
- What vehicles have a Dana 35?
- How do I identify my Dana front axle?
- What is a Dana M200 axle?
- What is Dana axle?
- How much power can a Dana 30 handle?
- What axle is in my Jeep cj7?
- What's the difference between a Dana 30 and Dana 44?
- What Ford trucks have a Dana 60 front axle?
- What vehicles came with a high pinion Dana 60?
- Is there a Dana 80 front axle?
Can you make a Dana 35 strong?
There are two options when upgrading the 35 shafts. Superior Axle & Gear offers its Super 35 kit and Warn has a full-float kit. The Super 35 kit is available for both C-clip and non-C-clip axles. The kit replaces the smallish shafts with 1.31-inch 30-spline pieces that are over 35 percent stronger than stock.
How do you tell if I have a Dana 35?
There are a few things that can help you tell if the axle is a Dana 35 or a Dana 44. The easiest way to tell these axles apart is to look at the shape of the differential cover. The Dana 35 cover is pretty much perfectly round. The Dana 44 is sort of a six-sided shape.
What is the difference between a Dana 30 and Dana 35?
The Dana 30 will only be found as a Jeep front axle while the Dana 35 will only be found as a rear axle on Wranglers. Dana 35 axles have earned a very poor reputation in the off-roading world, however, it is a great axle for stock Wranglers.
What vehicles have a Dana 35?
The Dana 35 (as well as the AMC-15) is found in a wide variety of vehicles. The most common Dana 35 applications are as a rear axle in the Jeep Cherokee, Jeep Wrangler, and Jeep Comanche and as a front axle in the Ford Explorer and Ford Ranger.
How do I identify my Dana front axle?
To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
What is a Dana M200 axle?
M200 Axle. Jeep JL and Gladiator JT Sport and Sahara owners have this axle assembly in the rear of their Jeep. The M200 is also referred to as a JL Dana 44. Motobilt has been working hard to bring you all many new products for the Jeep JL and Jeep Gladiator axle assemblies.
What is Dana axle?
The Dana/Spicer Model 44 is an automotive axle manufactured by Dana Holding Corporation and is used extensively among automobile manufacturers and in the automotive aftermarket area as well. The Dana 44 was first manufactured in the 1940s and is still being manufactured today, both front and rear axle variants.
How much power can a Dana 30 handle?
Amongst other things. To answer your question the stock supports 250 or 300 if you don't savage it. Run that rear until it blows, then stick an 8.8 in there.
What axle is in my Jeep cj7?
From 1976 to 1980, the CJ-7 used a Dana 20 transfer case, Dana 30 front axle (27- or 31-spline), and an 29-spline AMC 20 rear axle, while in recent years, Laredo package added tachometer, chrome bumpers, tow/recovery hooks and interior, comfortable leather seats, and clock.
What's the difference between a Dana 30 and Dana 44?
The only difference between the JK Dana 30 and Dana 44 is ring gear size, electronic locker, and bigger shafts. ... You're better off just starting with an aftermarket Dana 44 that is a “true 44”.
What Ford trucks have a Dana 60 front axle?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4x4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What vehicles came with a high pinion Dana 60?
Inside The Strongest Dana 60 Ever Built
Referred to internally as the "Fat Boy", the Dana Super 60 evolved from the '78-'79 Dana 60 front axle first found under Ford F-250 and F-350 trucks.
Is there a Dana 80 front axle?
A Dana 80 front axle without the adjustable knuckles will run about $6,240. Exact pricing will vary depending on your choice of locker or limited-slip, axleshafts, brakes, etc.
